Vu+ Solo SE V2 Full HD Twin Tuner DVB-S/S2 Linux HD PVR Ready Satellite Receiver

Vu+ Solo SE V2 Features:

Transcoding function
Opera Browser
HbbTV
HDMI 1.4 connection
Plug & Play Tuner
HD PIP
External 12 V power supply

Vu+ Solo SE V2 Technical Highlights:

1300 MHz Dual Core Mips processor
Plug & Play Tuner Slot for (DVB-S2, DVB-C / T, DVB-C/T/T2)
512MB Flash
1 GB DDR3 DRAM
1 x DVB Common Interface slot
1 x Smartcard-Reader (Xcrypt)
2 x USB
10/100 Mbit Ethernet Interface
SPDIF audio output optical (digital)
1 x HDMI 1.4 video / audio output (digital)
1 x RCA video output
2 x Audio output (L / R) RCA (analog)
unlimited channel lists for TV / Radio
EPG (electronic program guide) support
Support of Bouquet lists
OSD in many languages and skin-support
automatic / manual channel search
DiSEqC 1.0/1.1/1.2, USALS
External 12V power supply
power switch

Vu+ Solo SE V2 Specifications:

Dual / Twin DVB-S2 tuner
Input Frequency Range 950 .. 2150 MHz
Input Level - 65 dBm ... - 25 dBm
Tuner Input Connector F-Type female
Input Impedance 75 Ohm
AFC capture range + / - 3.5 MHz
Demodulation QPSK and 8PSK
FEC Viterbi and Reed-Solomon
Viterbiraten 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9
Roll-off Factor 35%

Common Interface:

Common-Interface Power Consumption max. 0.35 A/5V

Video decoding:

Video Compression MPEG-2 / H.264 and MPEG-1 compatible
Video Standard PAL G / 25 Hz, NTSC
4:3 / 16:9
Letterbox for 4:3 TV-Device

Output Digital:

Output Level 0,5 Vss on 75 Ohm
Sampling frequencies of 32 kHz, 44.1 kHz, 48 kHz
S / PDIF-Output optical, coaxial (AC3)

Audio coding:

MPEG-1 audio compression and MPEG-2 Layer I and II, MP3
Audio Mode Dual (main / sub), Stereo
Sampling frequencies of 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Analog output:

Output Level L / R 0,5 Vss on 600 Ohm
THD> 60 dB (1 kHz)
Crosstalk <-65 dB

Video parameter:

Input Level FBAS 1 Vss + / - 0.25 dB on 75 Ohm

Ethernet:

100/10 MBit compatible interface

USB:

USB 2.0 port (2x)

LNB power supply DVB-S2 Tuner:

LNB Current 400mA max. , Short-circuit proof
LNB Voltage horizontal "no load 19.5V" 17,6 V at 400mA
LNB Voltage vertical "no load 14.5V" 11,8 V at 400mA
LNB is switched off in standby mode

Control of the satellite position:

DiSEqC 1.0/1.1/1.2 and USALS - Rotor Control

Power consumption:

<13W (in operation, with LNB)
<12W (in operation, without LNB)
<0.5 W (Deep-Standby-Mode)

External power supply:

entrance:
110-240V AC / 50-60Hz / 1,0 A
exit:
12V = / 3,5 A

General:

Ambient temperature +15 ° C. .. +35 ° C
Humidity <80%
Dimensions (W x D x H): 211 mm x 185 mm x 40 mm

Please Note: This box is offered for sale to competent enthusiasts with knowledge of networking, FTP, and Telnet/SSH.

Vu+ Control Centre V0.8

Available to Download Now!
Includes:
Telnet Client
FTP Client
Media File Manager
HDD Manager
Settings Backup
Upload Channel List
Web Interface
IPK Installer.
Driver Manager.
Click HERE to download.

Vu+ Solo SE V2 Image Installation Service

We now offer an image installation service.
We'll install the image of your choice. See drop-down menu above for options.
Set-up Tuner Configuration for motorised dish using USALS.
Install the latest catseye channel list.
Configure Weather Plugin for your Area.

There is an additional charge of £9.99 for this service.