Moteck V-BOX II DiSEqC 1.2 to 36v Positioner Convertor
The Moteck V-Box II allows a DiSEqC 1.2 satellite receiver to control a conventional actuator style 36 volt motor. It takes DiSEqC 1.2 commands from your MPEG-2 / MPEG-4 DVB satellite receiver and converts it into 36v pulse and sensor to store positions, 60 positions can be stored. It can work as a stand alone positioner too. Please note it will only convert DiSEqC 1.2 commands, it WON'T convert USALS commands.
Technical Specification:
•Compatible with any Actuator or H-H Mount
•3 Digit LED Display
•Drive Dish up to 3M (Optional:5M)
•60 Satellite Positions
•Fine-tune EAST / WEST Buttons
•Electric Overload Protection ( Auto-recovery )
•Anti-Noise Design
•Model V-BOX II
•Input 230 VAC / 50Hz(110 VAC / 60Hz available)
•Output 36 VDC
•Max. Output Current 3.5A / 4.2A
•Max. Power Consumption 80W / 100W
•Protocol DiSEqC 1.0 / 1.2
•Controled by DiSEqC 1.2 Receiver or as standalone unit
•Remote Control
•Resynchronize Function YES
•Manual Buttons Power ON / OFF, EAST / WEST
•Protection Software Limit Protection