Home :: Satellite Receivers :: Vu+ Vuplus :: Vu+ Duo2 Full HD 1080p Twin Tuner Linux Satellite Receiver PVR ready

Vu+ Duo2 Full HD 1080p Twin Tuner Linux Satellite Receiver PVR ready

Vu+ Duo2 Full HD 1080p Twin Tuner Linux Satellite Receiver PVR ready
Vu+ Duo2 Front Vu+ Duo2 Rear Vu+ Duo2 Side
SKU Vu+ Duo2
Quantity in stock 3 item(s) available
Market price: £313.00
save 4%
Our price: £299.00 (340.86)
Hard Drive
USB Flash Drive
Image Installation Service
Add 2nd Tuner
Quantity (3 available)

Vu+ Duo2 Full HD 1080p Twin Tuner Linux Satellite Receiver PVR ready

Twin Tuner Linux PVR ready receiver.

Supplied with 1 Twin Tuner DVB-S/S2 Satellite Tuner module as standard (Twin Tuner)

The new flagship receiver from VuPlus. Vu+ Duo2 new features include improved connectivity to mobile devices such as notebooks, tablets and mobile phones. Thanks to the transcoding function, the gigabit LAN and the fast computational speed HDTV content can now be seen on all mobile iOS or Android devices. The built-in Wlan interface allows even inexperienced users to use network-based content such as HbbTV or streaming.

Digital satellite receiver for digital TV and Radio programs.

Support for up to 4 tuners if you buy 2 additional Twin Tuner Plug and Play Modules providing enough room to satisfy even the most demanding user.

The main feature is the strong 1300 MHz Dual Core processor VU+ Duo2. Experience high definition TV with your VU+ Duo2.

Vu+ Duo2 Features:

2 x Plug & Play tuner slots suitable for DVB-S2 / DVB-C / T / DVB-S2 Dual tuners
Transcoding function
Airplay function
Opera browser
HbbTV
HDMI 1.4 connection
HD PIP
Gigabit Lan
Plug and Play support for 2.5 "SATA - Hard Drives
2 x display (VFD and LCD)
WOL

Vu+ Duo2 Technical Highlights:

1300 MHz dual-core MIPS processor
1GB Flash
2GB DDR3 DRAM
Gigabit Lan
2 x DVB Common Interface slot
2 x Smartcard-Reader (Xcrypt)
3 x USB (1 x front, 2 x back)
SPDIF audio output optical (digital)
1 x HDMI 1.4 video / audio output (digital)
1 x Scart (TV)
1 x RCA video output
2 x audio output (L / R) RCA (analog)
Plug and Play support for 2.5 and 3.5 "SATA - Hard Drives
unlimited channel lists for TV / Radio
EPG (electronic program guide) support
Support of Bouquet lists
OSD in many languages ​​and skin-support
automatic / manual channel search
DiSEqC 1.0/1.1/1.2, USALS
Power switch

Vu+ Duo2 Specifications:

DVB-S2 Dual Tuner:

Input Frequency Range 950 .. 2150 MHz
QPSK Demodulation EN 302 307
Signal Level - 65 dBm ... - 25 dBm
Noise Level 12 dB max.
DBS-Tuner Input Connector F-Type female
Input impedance 75 ohms
AFC capture range + / - 3 MHz
Demodulation Shaped QPSK and 8PSK
Viterbi and Reed-Solomon FEC
Viterbi rates 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9
Roll-off Factor 35%

Vu+ Duo2 Common Interface:

2x Common Interface Power Consumption max. 0.35 A/5V

Vu+ Duo2 Video decoder:

Video Compression MPEG-2 / H.264 and MPEG-1 compatible
Video Standard PAL G / 25 Hz, NTSC
Video Formats 4:3 / 16:9
Letterbox for 4:3 TV-Device

Vu+ Duo2 Output digital:

Output Level 0,5 Vss on 75 Ohm
Sampling frequencies 32 kHz, 44.1 kHz, 48 kHz
S / PDIF-Output optical, coaxial (AC3)
Audio decoder: goldwafers.com
Audio compression MPEG-1 & MPEG-2 Layer I and II, MP3
Audio Mode Dual (main / sub), Stereo
Sampling frequencies 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22:05 kHz, 24 kHz

Vu+ Duo2 Output analog:

Output Level L / R 0,5 Vss on 600 Ohm
THD> 60 dB (1 kHz)
Crosstalk <-65 dB

Vu+ Duo2 video parameter:

Input Level FBAS 1 Vss + / - 0.25 dB on 75 Ohm

Vu+ Duo2 TV-Scart:

Output: FBAS, RGB, over OSD selectable

Vu+ Duo2 Ethernet:

1000/100/10 MBit compatible interface

Vu+ Duo2 USB:

USB 2.0 connector (3x)

Vu+ Duo2 LNB power and DVB-S2 tuner:

LNB Current 400mA max. , Short-circuit proof
LNB Voltage horizontal "no load 19.5V" 17,6 V at 400mA
LNB Voltage vertical "no load 14.5V" 11,8 V at 400mA
LNB is switched off in standby mode

Vu+ Duo2 Control of the satellite position:

DiSEqC 1.0/1.1/1.2 and USALS - Rotor Control

Vu+ Duo2 Power consumption:

<15W (in operation, with LNB)
<13W (in operation, without LNB)
<0.5 W (Deep-Standby-Mode)

Vu+ Duo2 Input voltage:

230V / 50 Hz alternating current + / - 15%
110V / 60 Hz alternating current + / - 15%

Vu+ Duo2 General:

Ambient Temperature +15 ° C. .. +35 ° C
Humidity <80%
Dimensions (W x D x H): 380 mm x 290 mm x 60 mm
Weight: 3,0 kg without HDD


Vu+ Control Centre V0.8

Available to Download Now!
Includes:
Telnet Client
FTP Client
Media File Manager
HDD Manager
Settings Backup
Upload Channel List
Web Interface
IPK Installer.
Driver Manager.
Click HERE to download.


Vu+ Duo2 Image Installation Service

We now offer an image installation service.
We'll install the image of your choice. See drop-down menu further down the page for options.
Set-up Tuner Configuration for motorised dish using USALS.
Install the latest catseye channel list.
Configure Weather Plugin for your Area.

There is an additional charge of £9.99 for this service.


Vu+ Duo2 Hard Drive Installation Service

Add a 1TB or 2TB HDD to your order and turn your receiver into an awesome PVR and Media Centre!

Save yourself the hassle of installing your own drive and let us do the work for you!

Select Hard Drive from the options drop down box below.


: *
: *
: *
Type the characters you see in the picture:


*

Product rating

Sign in to rate
 
The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu.