Vonets VAP11G USB WiFi Bridge IEEE 802.11b/g

Do you require wireless LAN on your ethernet enabled device?

This brilliant bit of kit will enable you to connect any product that has an RJ45 Ethernet Port and a USB port (for power only) to a wireless router.

The Vonets VAP11G USB WiFi Bridge is powered by USB however it also has a separate DC input if external power is required. Example for Dreambox DM500 Connect the DM500 PSU to the DC input socket on the WiFi Bridge and connect the power out from WiFi Bridge to DM500.

Suitable for AZBox HD, Dreambox, SpiderBox, Vu+ Duo, Vu+ Solo, Media Players, Game Consoles, IP Cameras, VoIP Phones and any other device with an RJ45 Ethernet port.

Simply connect the included USB Lead from the WiFi Bridge to a spare USB socket on the receiver / game console for power and connect the included RJ45 Ethernet lead from the WiFi Bridge to the RJ45 Ethernet socket on the receiver / game console for wireless connection.

The Vonets VAP11G USB WiFi bridge can convert any device with an RJ45 Ethernet Port into wireless including the following:-

  
• Gaming consoles (including PlayStation 3 and XBox 360 etc),  
• IP Security Cameras & IP DVR's  
• VoIP ATAs & VoIP Phones  
• All IPTV Setup Boxes (including Dreambox's etc)  
• NAS Drives  
• Media Players and Streamers (such as popcorn, snazzi)  
• Network Printers & Scanners  
• Anything with an ethernet port...  

Specifications

• USB Interface USB Port for power in or /1x DC-2.0 female power port for power in; interchangeable  
• Ethernet Interface 10/100 Ethernet RJ45 Connector  
• Power Out DC-2.0 male power port for power out;  
• Input Voltage DC5V-15V  
• Consumed Power < 1.5W  
• Transmission Distance ~23-35m  
• Encryption Support WEP (64 bit), WEP (128 bit), WPA, WPA2  
• Wireless Compatability IEEE 802.11B/G  
• Transmission Frequency 2.4Ghz  
• Wifi Model AP Client  
• VOIP Adapter Support ALL VoIP ATAs and VoIP Phones

Installation / Setup VAP11G Instructions

Install the software CD to your PC

Connect WiFi Bridge to RJ45 Ethernet Port on PC

Connect WiFi Bridge to a spare USB Socket on PC for Power.

Run the Software and follow the instructions for configuring the WiFi Bridge for connection to your Wireless Router.

Once you have installed everything correctly you'll get a flickering Blue and Orange Light on the VAP11G.

You can now disconnect it from your PC and connect it to your Receiver / Games Console / Media Player / etc.


The Kit supplied comprises of:

1 x VAP11G Wifi Bridge
1 x USB Power Lead
1 x RJ45 Ethernet Lead.
1 x Software CD