Smargo SmartReader Plus Smargo SmartReader+

Smargo SmartReader Plus Smargo SmartReader+

Smargo SmartReader Plus Smargo SmartReader+
Smargo SmartReader Plus Smargo SmartReader Plus

Smargo SmartReader Plus Smargo SmartReader+

The SmartReader + is a USB cardreader / programmer based on a powerful ATMEL ARM 91 processor. The SmartReader + incorporates an integrated USB to Serial converter, which enables the SmartReader plus to work with all standard Phoenix compatible Linux and Windows applications.

The SmartReader supports besides Linux/Windows computers and receivers various Linux and Windows applications for PCI-DVB or USB-DVB.

The Smargo® SmartReader Plus can not only be used in Linux or Windows computers but also in satellite receivers, routers, USB hubs or other embedded systems, as long as a USB connection is available and open source software is supported.

The SmartReader Plus is compatible with most common smartcards and the frequency is adjustable.

The Smargo Smartreader Plus is the next generation of all smartcard readers... The Smartreader Plus supports RS232 over USB. It works with all versions of windows and linux and handles ALL regularly used frequencies automatically. Is has a fullspeed USB 2.0 interface and the powerful firmware-upgradable CPU ensures future compability.

Details

Powerfull ARM 91 Thumb Processor
High-performance 32-bit RISC Architecture
High-density 16-bitInstruction Set
64 Kbytes, organized in 512Pages of 128 Bytes (Single Plane)
16 Kbytes Internal High-speed SRAM, Single-cycle Access at Maximum Speed
Low-power RC Oscillator, 3 to20 MHz On-chip Oscillator and one PLL
Supports 3.20, 3.43, 3.69,4.00, 4.36, 4.80, 5.34, 6.00, 6.86, 8.00, 9.61, 12.0
and 16.0 MHz for smartcards (T=0 and T=1)
No switches on programmer to select the desired mode, automatic frequency controll
5V smartcard support
Frequency/Baudrate autocalculation and Frequency Generator
Supports standard ftdi_sio driver for Windows and Linux applications
Developer guide available.
Works on all Dreambox Models with USB connection, also on 6 MHz with Dreambox 7025.
Can be cascaded with more SmartReaders (>100) in 1 system using an USB Hub
Fullspeed USB1.1/ USB2.0
Com Port via USB
No power supply or cables required
True ISO7816
Upgradable firmware
Windows driver available
The Full speed USB communication ensures fast and correct data transfer to the card
Compatible with PCI-DVB or USB-DVB devices

Possibilities

EXTRA CARDREADER
For eg: Dreambox, Reelbox, Triple Dragon, Linux PC or Windows PC
MULTIPLE SMARTREADERS
SmartReaders can be cascaded in an USB hub without limitations.
SERIAL CARDREADER MODE
Linux: /dev/usb/tts/X or serial COM port under Windows

Details
SKU Smargo SmartReader+
Quantity in stock No items available
 
Our price: £23.99 (27.59)
Quantity Price
5-9 Items £23.00
10+ Items £22.00
*Note:
Options
Quantity Out of stock
: *
: *
: *
Type the characters you see in the picture:


*

Product rating

Sign in to rate